Noble Company
Home > About Installation Products > Noble Company
Noble Company product applications include Waterproofing, Crack Prevention, and Sound Reduction under tile flooring. The Engineered Fluids Division manufactures freeze protection fluids for various applications such as Hydronic under-floor heating, Solar Heating Systems, Geothermal Systems, and Fire Sprinkler Systems.
NOBLE SEAL
NOBLE RICH PAN PVC SHOWER PAN LINER 6' WIDE
The Noble RichPan 1040 is a flexible polyvinyl chloride (PVC) membrane used under full mortar bed installations for concealed waterproofing.
This sheet may be installed by a thin-bed method directly on properly prepared substrates per industry guidelines.
-
RichPan is designed for full mortar bed installations
-
RichPan meets requirements of the IAPMO #3577.
-
Do not use with direct thin-set tile method. Noble Company recommends using NobleSeal TS for thin-set applications.
-
Tile cannot be directly bonded to RichPan. A reinforced mortar bed is generally laid over RichPan. Tile can then be thin-set to the mortar bed.
NOBLE PVC OUTSIDE CORNER & CURB PROTECTOR
Protects against leaks in problem areas (i.e. dams, outside corners).Provides a quicker, watertight installation.
• Made from PVC
• Use with RichPan 1040
Dimensions:
Height: 3-1/8"
Diameter: 5-3/4"
NOBLESEALANT 150
10.3 OZ Tube
Polymeric sealant used to seam sheets together, seal penetrations, drains, edges, or corners.
• Times for curing can vary from 30 minutes to 24 hours depending on a variety of conditions (e.g. temperature, humidity, etc.).
• Unaffected by exposure to water after it has cured
• Adheres to wood, metal, concrete, glass, plastic & rubber
• Broad temperature use range
• Excellent resistance to ozone, sunlight & weathering
Spread Rate:
3/16” bead - approximately 40 lin. ft.
Application Method:
Apply with a heavy-duty commercial caulking gun.
NOBLE NICHE 306 NARROW ARCH COMBO
Preformed, waterproof niche for tile showers. Made from extruded polystyrene (XPS) and coated with acrylic polymer finish that is ready to tile.
• Installs in minutes
• Waterproof & ready-to-tile
• Mounts flush in 2” x 4” stud walls with 1/2” backerboard
• Durable and lightweight
Dimensions:
Wide: 8-1/4”
High: 22-1/2”
Deep: 4”
NOBLE NICHE 303 WIDE ARCH COMBO
Preformed, waterproof niche for tile showers. Made from extruded polystyrene (XPS) and coated with acrylic polymer finish that is ready to tile.
• Installs in minutes
• Waterproof & ready-to-tile
• Mounts flush in 2” x 4” stud walls with 1/2” backerboard
• Durable and lightweight
Dimensions:
Wide: 14-1/4”
High: 22-1/2”
Deep: 4”
NOBLE WEEP HOLE PROTECTOR
Preformed, waterproof niche for tile showers. Made from extruded polystyrene (XPS) and coated with acrylic polymer finish that is ready to tile.
• Installs in minutes
• Waterproof & ready-to-tile
• Mounts flush in 2” x 4” stud walls with 1/2” backerboard
• Durable and lightweight
Dimensions:
Wide: 14-1/4”
High: 22-1/2”
Deep: 4”
NOBLE PRO SLOPE 60 x 60
Patented preformed composite made from expanded polystyrene (EPS) with a reinforced cutting template that creates a code required slope under the water proofing membrane in a full mortar bed application. Slope is in all directions to the center.
• Slope allows moisture to drain
• Helps eliminate a main cause of mildew and fungus
• Saves time - light and easy to cut
• Durable: Rated at 500 lbs./sq. ft.
Dimensions:
60" wide x 60" long
Thickness: 1/8" to 1-1/4"
